DryAir Equipment - Portable Climate Control - ICS Group, Calgary, Alberta

DryAir

Heat / Dry
Thaw / Cure
Accessories

COMPONENT BASED - Hydronic to air heating and construction drying equipment. Equipment trailers are available. Blended system configurations are available. Please inquire for more information.

001 Heat / Construction Dry Kit
	Brand: DRYAIR	KHD0250B-080X3

	Up to 248,000 Btu’s (input) Propane, Natural Gas Fuel Options Three points of distribution Includes three 80,000 btu, 900 cfm fan forced, thermostat controlled heat exchangers Two stage burner output 115V, 1-phase, 60 Hz, 15A power requirement for central heater and each heat exchanger Use central heater for sequential, or simultaneous heat, thaw, construction dry or temperature controlled cure by switching between, or running multiple components as required. Additional accessories may be required based on specific configurations. Deliver heat over 400’ away from central heater, or heights over 200’ from ground level by incorporating high elevation plate heat exchangers.

002 Heat / Construction Dry Kit
	Brand: DRYAIR	KHD0870B-080X8

	Up to 896,000 Btu’s (input) Propane, Natural Gas or Diesel Fuel Options Eight points of distribution Includes eight 80,000 btu, 900 cfm fan forced, thermostat controlled heat exchangers Two stage burner output 115/230v single phase, 60Hz 30A 4 wire power requirement for central heater 115V, 1-phase, 60 Hz, 15A power requirement for each heat exchanger Use central heater for sequential, or simultaneous heat, thaw, construction dry or temperature controlled cure by switching between, or running multiple components as required. Additional accessories may be required based on specific configurations. Deliver heat over 400’ away from central heater, or heights over 200’ from ground level by incorporating high elevation plate heat exchangers. Unique -PATENT PENDING- combustion environment control system maintains optimum fuel and combustion air temperatures and assures system start-up and smooth, efficient & reliable operation in the widest range of ambient conditions.

003 Heat / Construction Dry Kit
	Brand: DRYAIR	KHD0870B-200X4

	Up to 896,000 Btu’s (input) Propane, Natural Gas or Diesel Fuel Options Four points of distribution Includes four 200,000 btu, 2200 cfm fan forced, thermostat controlled heat exchangers Two stage burner output 115/230v single phase, 60Hz 30A 4 wire power requirement for central heater 115V, 1-phase, 60 Hz, 15A power requirement for each heat exchanger Use central heater for sequential, or simultaneous heat, thaw, construction dry or temperature controlled cure by switching between, or running multiple components as required. Additional accessories may be required based on specific configurations. Deliver heat over 400’ away from central heater, or heights over 200’ from ground level by incorporating high elevation plate heat exchangers. Unique -PATENT PENDING- combustion environment control system maintains optimum fuel and combustion air temperatures and assures system start-up and smooth, efficient & reliable operation in the widest range of ambient conditions.

004 Heat / Construction Dry Kit
	Brand: DRYAIR	KHD1200B-080X15

	Up to 1,233,000 Btu’s (input) Propane or Natural Gas Fuel Fifteen points of distribution Includes fifteen 80,000 btu, 900 cfm fan forced, heat exchangers Two stage burner output 115/230v single phase, 60Hz 30A 4 wire power requirement for central heater 115V, 1-phase, 60 Hz, 15A power requirement for each heat exchanger Use central heater for sequential, or simultaneous heat, thaw, construction dry or temperature controlled cure by switching between, or running multiple components as required. Additional accessories may be required based on specific configurations. Deliver heat over 400’ away from central heater, or heights over 200’ from ground level by incorporating high elevation plate heat exchangers.

005 Heat / Construction Dry Kit
	Brand: DRYAIR	KHD1200B-200X6

	Up to 1,233,000 Btu’s (input) Propane or Natural Gas Fuel Six points of distribution Includes six 200,000 btu, 2200 cfm fan forced, thermostat controlled heat exchangers Two stage burner output 115/230v single phase, 60Hz 30A 4 wire power requirement for central heater 115V, 1-phase, 60 Hz, 15A power requirement for each heat exchanger Use central heater for sequential, or simultaneous heat, thaw, construction dry or temperature controlled cure by switching between, or running multiple components as required. Additional accessories may be required based on specific configurations. Deliver heat over 400’ away from central heater, or heights over 200’ from ground level by incorporating high elevation plate heat exchangers.

006 Heat / Construction Dry Kit
	Brand: DRYAIR	KHD1200B-600X2

	Up to 1,233,000 Btu’s (input) Propane or Natural Gas Fuel Two points of distribution Includes two 600,000 btu, 5000 cfm fan forced, heat exchangers Two stage burner output 115/230v single phase, 60Hz 30A 4 wire power requirement for central heater 115V, 1-phase, 60 Hz, 15A power requirement for each heat exchanger Use central heater for sequential, or simultaneous heat, thaw, construction dry or temperature controlled cure by switching between, or running multiple components as required. Additional accessories may be required based on specific configurations. Deliver heat over 400’ away from central heater, or heights over 200’ from ground level by incorporating high elevation plate heat exchangers.

Central Heater
	Brand: DRYAIR	CHU1200
	Spec Sheet
	1,200,000 btu/hr Propane or natural gas fuel source, can be converted to natural gas or propane with optional conversion packages Powers air heat exchangers, ground thaw hose or concrete curing lines Compact and portable design for easy positioning on the work site Water heater has a 2-stage output allowing variable heat delivery to accommodate changing heat requirements All system operation is controlled and monitored from the heat module control panel Temperature control and fuel usage is automatic 8-light system operation feature for easy system troubleshooting Fluid circulation system is low pressure and atmospherically vented. There is no chance of an explosion or line burst due to pressure build-up. No special boiler certification is required to operate the system Quick-connect hose couplers, “no-drain” fluid lines and a “rapid air elimination” feature ensures quick setup-and-go operation A transport trailer is available and is specifically designed to carry the Dryair central heating module

Central Heater
	Brand: DRYAIR	CHU0870
	Spec Sheet
	900,000 btu/hr Natural Gas, Propane or Diesel Fuel Powers air heat exchangers, ground thaw hose or concrete curing lines Temperature control and fuel usage is automatic Includes unique “Climate Control” system which ensures efficient and reliable burner operation in all conditions Compact and portable design for easy positioning on the work site All system operation is controlled and monitored from the central heating module control panel 8-light system operation feature for easy system troubleshooting Fluid circulation system is low pressure and atmospherically vented There is no chance of an explosion or line burst due to pressure build-up No special boiler certification is required to operate the system Quick-connect hose couplers , “no drain” fluid lines and a “rapid air elimination” feature ensures quick setup-and-go operation A transport trailer is available and is specifically designed to carry the Dryair central heating module Trailer has a built-in lock box for enclosing an optional portable generator Add an optional diesel-powered genset for complete self-contained operation on a non-powered site Conforms to most special job requirements due to its modular nature

Central Heater
	Brand: DRYAIR	CHU0250
	Spec Sheet
	250,000 btu/hr Propane or natural gas fuel source Powers air heat exchangers, ground thaw hose or concrete curing lines Compact and portable design for easy positioning on the work site All system operation is controlled and monitored from the heat module control panel Temperature control and fuel usage is automatic 8-light system operation feature for easy system troubleshooting Fluid circulation system is low pressure and atmospherically vented. There is no chance of an explosion or line burst due to pressure build-up. No special boiler certification is required to operate the system. Quick-connect hose couplers, “no-drain” fluid lines and a “rapid air elimination” feature ensures quick set up and go operation.

Steam Plate Heat Exchanger (CE315)
	Brand: DRYAIR	HESF-1000
	Spec Sheet
	Steam-to-Fluid heat exchanger Automatic temperature control Up to 1mm btu per unit Can be used with any of the DRYAIR heat distribution accessories Using an existing steam source can be one of the most versatile and economical approaches to delivering temporary heat on a construction site / building renovation

COMPONENT BASED SYSTEMS - Equipment trailers are available. Custom manifolds and lines can be connected for in-concrete curing applications. Please inquire for more information.

001 Thaw / Cure Kit
	Brand: DRYAIR	KGT0870B-6000X1

	896,000 Btu’s (input) Propane, Natural Gas & Diesel Fuel Options 6000' Total Hose Length 750' Zone Length Eight zones 12,000 square feet of thaw @ 24” spacing 36,000 square feet of cure @ 24” spacing, (additional hose reel required) Two stage burner output Reversible motor with footswitch 115/230v single phase, 60Hz 30A 4 wire power requirement for central heater & 115V, 1-phase, 60 Hz, 15A for ground thaw reel Unique -PATENT PENDING- combustion environment control system maintains optimum fuel and combustion air temperatures and assures system start-up and smooth, efficient & reliable operation in the widest range of ambient conditions. Connect to optional flow reverser "Smart Thaw System” to reverse the direction of flow through the thaw/cure hose, at predetermined, equal time intervals. The “Smart Thaw System” process creates equal transfer of heat throughout... very desirable in ground thaw and concrete cure applications. **Ground thaw penetration rates will vary based on type of soil, moisture content, soil compaction, frost depth, line spacing and tarp R-Value.

002 Thaw / Cure Kit
	Brand: DRYAIR	KGT1200B-6000X1

	Up to 1,233,000 Btu’s (input) Propane, Natural Gas Fuel Options 6000' Total Hose Length 750' Zone Length Eight zones 12,000 square feet of thaw @ 24” spacing 36,000 square feet of cure @ 24”, (additional hose reel required) Two stage burner output Reversible motor with footswitch 115/230v single phase, 60Hz 30A 4 wire power requirement for central heater & 115V, 1-phase, 60 Hz, 15A for ground thaw reel Connect to optional flow reverser "Smart Thaw System” to reverse the direction of flow through the thaw/cure hose, at predetermined, equal time intervals. The “Smart Thaw System” process creates equal transfer of heat throughout... very desirable in ground thaw and concrete cure applications. **Ground thaw penetration rates will vary based on type of soil, moisture content, soil compaction, frost depth, line spacing and tarp R-Value.

003 Thaw / Cure Kit
	Brand: DRYAIR	KGT1200B-6000X2

	Up to 1,233,000 Btu’s (input) Propane, Natural Gas Fuel Options 12000' Total Hose Length 750' Zone Length Eight zones 24,000 square feet of thaw @ 24” spacing 72,000 square feet of cure @ 24”, (additional hose reel required) Two stage burner output Reversible motor with footswitch 115/230v single phase, 60Hz 30A 4 wire power requirement for central heater & 115V, 1-phase, 60 Hz, 15A for each ground thaw reel Connect to optional flow reverser "Smart Thaw System” to reverse the direction of flow through the thaw/cure hose, at predetermined, equal time intervals. The “Smart Thaw System” process creates equal transfer of heat throughout... very desirable in ground thaw and concrete cure applications. **Ground thaw penetration rates will vary based on type of soil, moisture content, soil compaction, frost depth, line spacing and tarp R-Value.

Thaw / Cure Greenthaw
	Brand: DRYAIR	GTS6000D-230
	Spec Sheet
	Greenthaw incorporates a flow reverser with temperature control and adjustable cycle timer resulting in uniform thaw pattern, quicker thaw and reduced fuel consumption. 620,200 BTU (input) 250 US GAL diesel fuel tank Fuel consumption at 100% 4.43 US GPH, 16.8 LPH 4,000’ hose length Standard 8,000 sq. ft of thawing capacity expandable to 11,000 sq. ft. Single stage burner cycles off and on as required. Reversible motor with footswitch Optional Generator Option for 120V or 220V power Patented Combustion Environment Control System pre-heats the combustion air and fuel to provide the burner with an ideal combustion environment in the widest range of ambient conditions.

Accessories

200,000 BTU Portable Fan Forced Heat Exchanger
	Brand: DRYAIR	HE200
	Spec Sheet
	Thermostat Control Ideal for heating, drying and climate control applications. Their compact and mobile design allows them to be positioned where required on the job site. The efficient fan/coil design provides a high rate of heat transfer with built-in, high volume fans provide the heat delivery.

600,000 BTU Portable Fan Forced Heat Exchanger
	Brand: DRYAIR	HE600
	Spec Sheet
	Ideal for heating, drying and climate control applications. Their compact and mobile design allows them to be positioned where required on the job site. The efficient fan/coil design provides a high rate of heat transfer with built-in, high volume fans provide the heat delivery.

80,000 BTU Portable Fan Forced Heat Exchanger
	Brand: ICE DRYAIR	HE080
	Spec Sheet
	Thermostat Control Ideal for heating, drying and climate control applications. Their compact and mobile design allows them to be positioned where required on the job site. The efficient fan/coil design provides a high rate of heat transfer with built-in, high volume fans provide the heat delivery.

Hose Reel
	Brand: DRYAIR	GTR6000 & GTR3000
	Spec Sheet
	The reel’s primary purpose is to dispense or collect fluid circulation hose on job sites. Available with 6000 or 3000 foot 3/4” I.D. hose packages. “Unique” auto-feed system makes laying out hose on a job site a one-man operation. Can also be used to store or deploy other distribution system hoses used in Dryair portable heating applications. Independent modular design offers the following advantages over built-in reels; You have the choice of storing the hose reel at a secure location on or off the job site when not in use. Allows deployment of hose at more than one job site. Transport trailers are available. Reversible motor with footswitch 115V AC 15 amp

Humidistat
	Brand: DRYAIR	N/A
	Spec Sheet
	The humidistat, combined with a central heating module and portable heat exchangers, is the perfect solution for controlling humidity levels on a project. The unit is inserted in-line between the power supply and the powered heat exchanger(s). The humidistat functions as a controller. The humidity level set point has a full range of adjustment. Power will remain on while the structure humidity levels are higher than the humidistat set point. Once the humidity levels drop to the set level, power to the powered heat exchanger(s) is interrupted. If humidity levels rise above the set point, power will be turned on and the dehumidifying process will resume.

Manifold 4 Port
	Brand: DRYAIR	CS400
	Spec Sheet
	Distribution manifold - 4 - port Used primarily for powered heat exchange Ideal for heating, drying and climate control applications 2" kamlocks & ball valves for the primary fluid distribution connections 3/4” or 1” hydraulic-style quick couplers for the secondary fluid distribution connections Can connect to up to four portable heat exchangers

Manifold 8 Port Distribution
	Brand: DRYAIR	GTM0800
	Spec Sheet
	Distribution manifold - 8-port Used primarily for non-powered heat exchange Ideal for ground thaw, frost prevention and concrete cure applications 2" kamlocks & ball valves for the primary fluid distribution connections 3/4” hydraulic-style quick couplers for the secondary fluid distribution connections Can accommodate up to eight circulation line heat exchanger loops

Mixing Booster
	Brand: DRYAIR	CC300
	Spec Sheet
	Low temperature applications, such as concrete cure may require a fluid temperature lower than the central heating module is supplying to other areas at higher temperatures. By inserting the mixing/booster into the central heating module circulation loop, its mixing and tempering function will deliver and automatically maintain the lower temperature fluid required (ie: 70°F). Dual temperature control means one loop can be delivering high temperature fluid (ie: 180°F) to portable heat exchangers being utilized for structure heating applications. The other loop, with the mixing booster inserted, can provide and maintain low temperature fluid (ie: 70°F) for concrete cure applications. Pressure & flow boost-The mixing/booster can also be used to boost flow and increase the pumping distances in a fluid circulation system. The mixing/booster can be positioned where flow and pressure increases are required. This may be as much as 300 feet up-line from the central heating module or another "mixing/booster".

Plate Heat Exchanger
	Brand: DRYAIR	CE312
	Spec Sheet
	The plate heat exchanger, combined with a central heating module, is the perfect solution for delivering heat on a muti-storied project while still keeping the heat source at ground level. Circulate heat transfer fluid from 70 to 200+ feet above the central heating module’s elevation utilizing our standard primary fluid lines. Provides a fluid distribution system totally separate from the central heating module. The central heating module provides a fluid “hot” loop. The plate heat exchanger transfers heat from the central heating module “hot” loop to the separate “plate heat exchanger” fluid distribution system.

Transport Trailers
	Brand: DRYAIR	Model TR6000-2
	Spec Sheet
	2100 series, hose reel & generator transport GVWR - 13,860 lbs. Dimensions - Length - 285”, width - 94”, track width - 84” Deck - Steel, open porthole under hose reel to prevent mud build-up. Axles- Dual, #11 Torflex 0° Wheels - 16 x 6, 6-hole, 5 1/2 BC Tires - LT235-85-R16 load range Light hook-up - 6 pole connector Brakes - electric, with break-away switch Hook-up - pintle hitch (standard), dual safety chains Generator safety box - lockable, flow through ventilation, drawer-style generator deck for easy access, sized for a variety of generators. Optional 4-point lockout jacks - 4 point unit leveling & on-site unit security.

Transport Trailers
	Brand: DRYAIR	Model TRDL7000
	Spec Sheet
	Function - 2100 series, generator & cargo transport GVWR - 8,228 lbs. Dimensions - Length - 254”, width - 92”, track width - 82” Deck - Steel Axle - Single, #12 Torflex 0°. Wheels - 16 x 6, 8-hole Tires - LT235-85-R16, load range G Light hook-up - 6 pole connector Brakes - electric with break-away switch. Hook-up - pintle hitch(standard), dual safety chains. Generator safety box - lockable, flow through ventilation, drawer-style generator deck for easy access, sized for a variety of generators. Optional 4-point lockout jacks - 4 point unit leveling & on-site unit security.

Transport Trailers
	Brand: DRYAIR	Model TRRP3500
	Spec Sheet
	Function - 2000 series & generator transport GVWR - 3,500 lbs. Dimensions - Length - 191”, width - 73”, track width - 65” Deck - Steel Axle - Single, #10 Torflex 0° Wheels - DOT T-15 x 6, 5 hole Tires - ST205-75-R15 load range C, max load - 1,820 lbs.at 50 PSI cold. Light hook-up - 6 pole connector Brakes - electric with break-away switch. Hook-up - pintle hitch(standard), dual safety chains. Generator safety box - lockable, flow through ventilation, sized for a variety of generators. Optional 4-point lockout jacks ..-4 point unit leveling & on-site unit security.

Transport Trailers
	Brand: DRYAIR	Model HRTR6000
	Spec Sheet
	Function - hose reel transport GVWR - 6,000 lbs. Dimensions - Length - 158”, width - 102”, track width - 92” Deck - Steel, open porthole under hose reel to prevent mud build-up. Axles - Single, #11 Torflex 0° Wheels - 16 x 6, 6-hole Tires - LT235-85-R16 load range Light hook-up - 6 pole connector Brakes - electric, with break-away switch Hook-up - pintle hitch (standard), dual safety chains

Equipment

Additional Resources

ICS Corporate Brochure