Oil, Gas and Industrial

Oil, Gas & Industrial Case Studies

All industrial worksites face unique challenges every day. Read about how we helped with freeze prevention, concrete curing, and fabrication heating right on the job.

Browse our Oil, Gas & Industrial Case Studies by application type.

Frac Fluid Temperature Control

CONTROL TEMPERATURE - WATER TO BE USED IN THE HYDRAULIC FRACTURING OF ROCK
ICS was challenged to heat a 3,000 cubic meter above-ground pool and lift and maintain the temperature of water to be used in the hydraulic fracturing of rock.
more

Water & Fluids Freeze Prevention

HEAT & THAW - INDUSTRIAL FLUIDS IN TANK
Provide reliable and independent heat source during the entire winter season to assist in the separation of a variety of fluid mixtures contained in a large industrial tank.
more

Pipeline Concrete Coated Cure

CURE - CONCRETE COATED PIPELINE
A pipeline under construction required that concrete be attached for weight to keep the pipeline from floating to the surface where it crossed a river or muskeg.
more

Tank Coating Cure Heat

HEAT - OIL FIELD STORAGE TANK COATING
In a remote northern Alberta location an oil field storage tank needed industrial coating to be applied to the interior surface which faced an ambient air temperature of -30◦C.
more

Fabrication Heat

HEAT & DRY - INDUSTRIAL VESSEL FABRICATION
Heat and maintain a target temperature of 5 degrees C for vessels in structures which housed these vessels or outside. Provide dry clean air and ventilationwhich facilitated welding and instrument op ...
more

Additional Resources